Place a slide in the 35-mm slide holder, as shown below. Place the 35-mm slide holder on the document table in alignment with the upper right-hand corner of the document table.

You can move and adjust the position of 35-mm film by sliding the strips in the film holder so the frames you want to scan are positioned in the film holder opening. Place the film holder on the document table in alignment with the upper right-hand corner of the document table. Slide the strip until all of the frame you wish to scan is positioned inside the film holder opening. Insert a strip of film in the 35-mm film strip holder, base side facing down. The base side of the film is the side which the film maker's name and film ID numbers are shown.Īlign the up-down direction of the film with the illustration (the mirror writing of the alphabet 'F') printed on the film folder. Go to the section listed below that matches the type of transparency you want to scan. Load your transparencies into the film holders and position them on the scanner's document table. Make sure the cable for the Film Adapter is connected to the scanner's option connector. Touching the film surface with bare hands can leave fingerprints or other traces on the film. Hold the film at the edges, or else use gloves. Wipe the inside of the Film Adapter and the scanner's document table before scanning transparencies.įollow the steps below to load a film or a slide. If you plan to scan transparent materials from EPSON Photo Print utility, refer to the EPSON Photo Print documentation for details. If you plan to scan transparent materials from the EPSON Smart Panel application, refer to the EPSON Smart Panel documentation for details. You can scan a 35-mm film strip or slide. The following sections explain how to scan transparent materials. Make sure the scanner is unplugged and turned off.Ĭonnect the Film Adapter connector to the scanner's option connector.īy attaching the Film Adapter, you can scan transparent materials such as positive or negative film, by passing light through the material. Do not throw away the package after unpacking the Film Adapter as it can be used again for storage when you are not scanning transparencies.įollow the steps below to install the (optional) Film Adapter on the scanner.

If any items are missing or damaged, contact your EPSON dealer immediately. When you first open the package, make sure that all the following items are included. The Film Adapter is compact so it can be attached or removed easily when you alternate scanning between transparent materials and normal reflective (paper) documents. The Film Adapter (B81332 ) enables you to scan of negative film strips and slides simply by installing the unit on your scanner.

Epson perfection 1250 scanner specs